ÇATI provides the following services to Telecom Operators within the scope of Fiber Optic Infrastructure: ​ Permit Activities: Obtaining permits and licenses from the municipality and relevant institutions. Obtaining official permits from Business Centers, Shopping Malls, Sites and Buildings. Project Planning Activities: Site exploration, excavation route preparation, FO general and application project preparation, as-built preparation, FO Core plan and GPON network planning, Construction Works: Urban and intercity infrastructure excavation (mini tranche, machine excavation, hand excavation), manufacturing of manholes, additional and transition rooms, cable route creation (galvanized, steel, spiral, pan), vertical route creation inside the building FO Works: Cable pulling, FO termination, FO splices, OTDR testing, preparation of annexes and building distribution boxes, labeling Project Management Activities: Preparation of weekly reports requested by the customer, regular meetings with customer infrastructure departments Management of field teams and subcontractors: Executing and coordinating occupational health and safety (OHS) activities,

Gpon(Gigabit Passive Optic Network) is a fiber optic telecommunications technology to provide broadband network access to end customers. In cluster-shaped productions, a POP point is created and the field cabinets on certain streets are reached with feeder fiber cables (Feeder Cable F/O), and the buildings to be served are reached from the field cabinets with distributor fiber cables (Distribution Cable F/O). The main advantage of Gpon topology is that it provides gigabit speed voice and data service to up to 64 apartments over a single fiber strand by using different frequencies of light wavelengths transmitted on the fiber.

Thanks to FTTH (Fiber To The Home) technology, subscribers can benefit from high-speed internet traffic by bringing fiber cables to their homes. As Çatı, we have completed various projects reaching a total of 300,000 HP flats for Turkey's 3 largest telecom operators.

ÇATI Technology installs modems in the homes of fiber optic subscribers with its installation teams. Provides subscriber breakdown and support services. In addition, it provides network maintenance and fault support services to telecom operators.

Radiolink Systems are a technology based on data exchange between two points via electromagnetism. In these systems, data is carried out only in a narrow wave frequency corridor between two specific points. They cannot broadcast to large areas like television or radio transmitters. ​ VSAT (Very Small Aperture Terminal) can be called satellite ground systems created with small diameter antennas. Thanks to VSAT, two-way communication can be achieved between a HUB (Central Ground Station) point and other points. Services such as audio, video and internet can be easily provided with VSAT.

Structured cabling is used for workplaces, campuses, plazas, etc. within certain boundaries. They are cable systems used to ensure communication between network devices in areas such as these and to meet their energy needs.

Network systems are communication systems that enable the transfer, security and storage of data between users. Network systems consist of the combination of hardware and software produced for many different purposes. The first titles that come to mind are; Structured cabling, Switch and Router, firewall, Storage and Backup Wireless Hotspot,

Storage is the parts of computers and servers where data is kept and stored. Data storage and backup has become an indispensable need today, especially for corporate companies.

Firewalls are network system products that control the traffic of incoming/outgoing data packets to the network within rule sets determined in line with user requests and demands. Especially recently, as a result of the KVKK law coming into force, firewall systems have become very important for corporate companies.

Hotspot, campuses, cafes, airports, bus/train stations etc. These are systems that enable wireless internet broadcasting from the local network in public areas such as. Thanks to this system, users in large public areas can easily access the internet from their laptops or mobile devices.

IT Infrastructure refers to the entirety of the software and hardware created by computer-based systems and designed, developed and examined to ensure the transmission of data between users. Since IT Infrastructure projects must be considered as a whole, they must be supervised and audited by experts from the first moment to the last moment. In this context, as Cati, we continue to provide quality services to our customers with our expert staff.

Video Conferencing is a communication technology that allows multiple people to have simultaneous voice and video calls. For national and international companies with offices in more than one location and companies that work with remote/virtual teams, Video Conferencing System provides great convenience to hold meetings and interviews. In addition, it provides an advantage for public units to hold meetings among themselves quickly.

In order to ensure the continuity and efficiency of businesses, it is essential that the IT system equipment where all the data they collect works and is stored in a secure room. In this context, we offer on-site discovery, reporting and project services to meet the needs of businesses. Our Data Center Infrastructure Services within the Scope of ISO 27001: Air Conditioning Systems Fire Detection and Extinguishing Systems Raised floor (floor) and Lowered Ceiling, Epoxy Paint Construction works; fire resistant wall, paint, Firestops, Redundant Uninterruptible Power Supply Systems Cabinet and Corridor Closing Systems, Generator Systems Electrical Infrastructure; Cabling, Pan, Panel and Lighting, Cat6a, Cat7 and MPO Fiber Optic Cabling within the Scope of Network Cabling Ats, Sts and IP PDU Systems, Environmental Monitoring and Detection Systems

Switchboard System is basically used to automatically route telephone traffic between subscribers. Today, with the development of VOIP technology, the demand for IP switchboards from the private sector and public institutions is increasing. Thanks to IP switchboards, phone calls can be made using standard IP protocol.

It is a security technology generally used to ensure the security of pipelines (Water, Oil, Gas, etc.). With DAS technology, the sound waves produced by events occurring within the pipeline boundaries are detected and classified (vehicle, pedestrian, work machine, etc.) and warnings are sent to the central monitoring point. Fiber optic cable is manufactured underground along the line to be secured, and sound waves are read through this fiber line.

Weak Current can be considered as the whole of the structures with low voltage sources used to operate the devices of systems such as telephone and data, fire detection, emergency announcement, CCTV security and access control in electrical projects.

CCTV (Closed-Circuit Television) literally means closed circuit television. The main purpose of CCTV systems is to identify risk points that may have critical security vulnerabilities in a certain area (office, campus, factory, sites, etc.) and to transfer and record the camera images of these parts to a monitoring center. CCTV systems are basically divided into two based on the type of camera used; Analog Systems IP Systems While NVR (Network Video Recorder) is used for recording and viewing in IP systems, DVR (Digital Video Recorder) is used in Analog systems.

Video Management System (VMS) is software developed to monitor and manage the increasing number of cameras in network-based (IP) CCTV systems on a single screen. VMS software is flexible according to customer needs and scalable according to the needs of the structure. We can list a few basic features that VMS software provides as follows: Area Violation Alarms, Display on the map, Management of PTZ cameras, Video analysis features,

Nowadays, due to the increasing number of vehicles on the road, there is a need for more parking lots. Therefore, the need for Barrier Passage Systems has emerged in order to prevent confusion when entering and exiting vehicles in car parks. The most popular Barrier Crossing Systems is PTS (Plate Recognition System). Card Access Systems are used in places where there is a high density of people entering and exiting, such as medium and large-sized companies and sites with many sessions, to prevent the entry/exit of unauthorized persons and to eliminate security vulnerabilities.

PTS (Plate Recognition System) basically consists of an optical camera, a computer that processes the data transmitted by the camera, and image processing software. Nowadays, PTS has become a very important system requirement in terms of quickly controlling the entry and exit of vehicles from parking lots/sites/toll roads. Another feature provided by PTS is that it determines how long the vehicles use the parking lot at the entrance and exit of the car park and allows charging.

One of the Perimeter Intrusion Detection Systems is the fence detection system. With this system, thanks to the fiber optic cable installed along the wire fence line, there is no contact, impact, cutting, climbing, etc. on the fence. Activities such as these are detected and the relevant security units are alerted along with the location of this activity. It is generally preferred in critical facilities where security measures are at the highest level.

Fire Alarm Systems are a complex structure that detects a possible fire with its end-point detectors at the moment it starts, activates the fire extinguishing systems and ensures the operation of the relevant alarm warning systems for the evacuation of the area. One of the biggest advantages of Fire Alarm Systems can be said to be integration with other systems (Emergency Alarm, Access Control).